PRMD ActiveMap logo

Quick Start
| Help | FAQ

FAQ

  1. Why can't I see address and owner information when I zoom to a specific parcel?
  2. Why are the parcels and color photo layers not listed in the Map Legend Panel?
  3. Are aerial photographs available to the public?
  4. Is there information about specific layers found in the map such as last update and accuracy? How often is the layer updated?
  5. What coordinate system and projection is used?
  6. Can I download data displayed in ActiveMap?
  7. Why can I not find or get information about parcels found within the incorporated cities within the ActiveMap website?
  8. Who do I contact if I have an issue with the ActiveMap website?
  9. How do I turn off my browser's pop-up blocker?
  10. What should I do if I see incorrect information on the ActiveMap website?
  11. What software does the County of Sonoma use for its GIS?
  12. What does "Under Review - Consult Planner" mean?
  13. How do I find my latitude/longitude?

1) Why can't I see address and owner information when I zoom to a specific parcel?

The ActiveMap website has attempted to provide valuable tools and information for the public while preserving privacy concerns as well. The website has detailed information about the properties found within the unincorporated areas of the county, but does not make available to the public, owner names, addresses or phone numbers.

The following State Code pertains to the display of address & owner information by state & local agencies.

California Gov. Code 6254.21

"No state or local agency shall post the home address or telephone number of any elected or appointed official on the Internet without first obtaining the written permission of that individual."

To obtain owner information in regards to a specific property, please contact or visit the Sonoma County Assessor's Office.

Main Office Location
585 Fiscal Drive, Suite 103F
Santa Rosa, California 95403
Main Phone: 707-565-1888
Toll Free: 800-244-1034
Fax: 707-565-3317


Back to Top

2) Why are the parcels and color photo layers not listed in the Map Legend Panel?

There are layers in the map legend content that are scale dependent. This means that as you zoom in or out within the Map Display Area, various layers will either be available or not available for viewing due to a set scale display threshold. By setting scale dependent layers, it helps keep the map display clean and foucsed on relevant data.

For example, when the Map Display Area is at full County view or as you zoom out past a certain point, the parcel and photo layers will turn off (no longer viewable) nor appear listed in the Map Legend. However, the opposite also holds true. As you zoom in (e.g. 1" = 1,000 Ft.) within the Map Display Area and reach a display scale threshold, the parcels and photo layers will become available within the Map Legend and you can again turn them on or off as needed. Keep in mind that some scale dependent layers automatically turn on when zooming in past a certain point while other layers become avaialble in the Map Legend content yet are turned off.


Back to Top

3) Are aerial photographs available to the public?

The color aerial photographs displayed in the ActiveMap website were flown in August 2004 by AirPhotoUSA. Since the color aerials are not owned by the County of Sonoma, all information or purchase inquiries should be directed to:

DigitalGlobe, Inc (Formerly AirPhotoUSA)
20430 N. 19th Avenue
Suite 200
Phoenix, AZ 85027
Local: 623-476-3200
Toll Free: 866-278-2378
Fax: 623-582-2632
General Info: info@digitalglobe.com

Black and White Aerial Photography flown in Spring 2000 is not available in ActiveMap, yet is available for download at the County of Sonoma GIS Data Portal.


Back to Top

4) Where can I locate layer information such as last update and accuracy? How often is the layer data updated?

For specific information on the layers found within the ActiveMap website, please open the Layer Descriptions Panel located in the Panel area of the application.

Layer Description Panel Screenshot

Select the layer you are interested in. Information about the layer will be displayed in the panel. Links are included when more detailed information is available.

Data on the ActiveMap website is updated on a quarterly basis (January, April, July, October) and/or as needed. Each layer listed in the Layer Descriptions Panel has "Last Update" information provided.

Layer Description Panel Expanded Screenshot


Back to Top

5) What coordinate system and projection is used?

The County of Sonoma uses GCS North American 1983 for the geographic coordinate system and NAD 1983 State Plane California Zone II for the projected coordinate system for all our spatial data. Our unit of measurement is US Survey Feet.


Back to Top

6) Can I download data displayed in ActiveMap?

Some of the layers found within the ActiveMap website can be downloaded at no cost at the County of Sonoma GIS Data Portal.

For all other layers not found at this site, please contact:

Sonoma County Permit & Resource Management Department
2550 Ventura Avenue
Santa Rosa, California 95403
Main Phone: 707-565-1900


Back to Top

7) Why can't I find or get information about parcels within city boundaries in ActiveMap?

The ActiveMap website is a product of the Sonoma County Permit & Resource Management Department. Their jurisdiction is solely within unincorporated areas of the County. For information on city parcels, please contact the city directly or visit the Sonoma County Assessor's Office:

Main Office Location
585 Fiscal Drive, Suite 103F
Santa Rosa, California 95403
Main Phone: 707-565-1888
Toll Free: 800-244-1034
Fax: 707-565-3317


Back to Top

8) Who do I contact if I have an issue with the ActiveMap website?

The following steps can solve most problems:

  1. Clean out your temporary files and cookies from Internet Explorer (IE), as follows. Open IE. From the main menu, select Tools, Internet Options.

    Internet Explorer Screenshot

    Select the General tab. Select the button labeled Delete Cookies. Select the button labeled Delete Files. (This may take several minutes to complete.)

    Internet Explorer Screenshot

    Close IE and proceed to step #2.

  2. Add ActiveMap to your trusted sites, as follows. Open IE after completing step #1. Type our website address http://imsportal.sonoma-count.org/activemap into the address box.

    Internet Explorer Screenshot

    Click OK. Close the IE window. Open a new IE window. After our site comes up, go to the Tools menu bar. Click on Internet Options.

    Internet Explorer Screenshot

    Click on the Security tab. Select the Trusted Sites icon (green circle with white check mark). Click the Site... button.

    Internet Explorer Screenshot

    In the text box labeled "Add this Web site to the zone." copy and paste this url: http://imsportal.sonoma-county.org/activemap. Then click the Add button. Click OK. Click OK.

    Internet Explorer Screenshot

    Close out of all Internet Explorer windows. Open a new Internet Explorer window and type in our web site http://imsportal.sonoma-county.org/activemap into the address box.

  3. Various anti-virus software will block entry into our website. Please check your settings or temporarily disable your anti-virus software while using ActiveMap.
  4. For questions regarding the ActiveMap website, please select the Contact Us link found within the Help & Contact Menu of the website.

    Help Contact Menu


Back to Top

9) How do I turn off my browser's pop-up blocker?

To print a map or property report, your browser's pop-up blocker must be turned off. The following steps will deactivate the pop-up blocker in Internet Explorer (IE):

1. Open IE. From the main menu, select Tools, Internet Options.

Internet Explorer Screenshot

2. Select the Privacy tab. Uncheck the box labeled Block pop-ups.

Internet Explorer Options, Privacy Tab: Uncheck Pop-up Blocker


Back to Top

10) What should I do if I see incorrect information on the ActiveMap website?

Should you find incorrect information within ActiveMap, please select the Contact Us link found within the Help & Contact Menu of the website.


Back to Top

11) What software do you use for GIS?

Our core GIS software is ESRI's ArcGIS suite. ActiveMap uses the ESRI ArcServer software.


Back to Top

12) What does "Under Review - Consult Planner" mean?

Should a parcel of interest have zoning specified as "Under Review - Consult Planner," the zoning determination is currently under review by the Permit & Resource Management planning staff. For more information and/or to discuss the review process, please call the planner phone at 707-565-1900. In addition, please specify ActiveMap as the source of your zoning information inquiry.


Back to Top

13) How do I find my latitude/longitude?

ActiveMap does not provide latitude/longitude coordinates, but other websites such as www.getlatlon.com calculate latitude/longitude for any address point.


Back to Top